 |
Questions ? Call us at 905-624-5536 |
||||
|
|||||
|
||||||||||
 |
 |
Need pull stud specs? Click Here |
|---|
| You can look to Command for all your toolholding and boring applications. Our expertise at problem solving has made us #1.
Command provides the best in product, service, availability, and value. Representatives are located throughout North America to provide toolholder selection, custom toolholder design assistance, installation and training. Standard product is in stock for immediate delivery. We provide rapid turnaround on custom orders. Whatever it takes . . . we'll get you there ! |
Pull Stud (retention knob) dimensions Click Here for dimensioned drawings for Cat-V, MAS BT and others. |
 |
|---|
| NEW FLUID-DRIVEN RIGHT ANGLE HEADS ARE THE NEW SOLUTION FOR RIGHT ANGLE MACHINING IN CONFINED AREAS. |  |
| New Axis™ Fluid-Driven Keyway Cutter Offers Machining of Parts and Keyways in a Single Operation. |  |
| System II™ Adaptive Drawbar Dynamometer< Detects inadequate drawbar retention force quickly. Identifies if retention force losses are at fault when poor surface finishes appear or when tool performance deteriorates. Maximizes tool life, spindle life and system rigidity. To ensure toolholder performance, combine with Taper Check™ |
|
| Command Toolholders AT3 or better toolholder shank taper for accurate, rigid toolholder-to-spindle mount. Concentric to .0002" TIR, putting tool precisely on spindle centerline. Fully ground flange and V-groove for less spindle and tool changer maintenance. Full range of toolholders in BT-Flange, V-Flange and HSK. |
 |
| Custom Products & Modifications Matching requirements often go beyond standard toolholders. Unleash the potential of your machining centers - talk to Command's toolholder designers today. Command is ready to meet the challenges of custom toolholders with quick turnaround. Whatever it takes... we'll get you there. |
 |
| Micro Precision® Collet Chucks Micro Precision® DR series collets are compatible with DIN 6499 standard collets. Available in various series for tool shank sizes from .020" to 1.023" (.5 to 26.0 mm) Flush precision closure nut-grips tool close to cutting edge - accurate, rigid. Puts tool precisely on centerline |
 |
| XT Precision™ Collet Chucks The latest in high performance technology for improved accuracy and gripping pressure throughout the entire collet collapse range. Runout of .006 mm at the collet face is guaranteed with XT Precision™ Collet Chucks used with XT Precision™ Collets. Various series available for tool shank sizes from .0197" to 1.0236" (.50 to 26.00 mm). |
 |
| Comflex® and Comflex® X Collet Chucks The key reason for the Comflex® accuracy and gripping power is a unique Flush Nut Design. It incorporates a rotating ball assembly producing a "radial float". This in effect, forces the collet to self-center for maximum grip, highest precision and minimum tool wear. Available in various series for tool shank sizes from .078" to 1.50". Comflex® X was specifically designed for high speed applications with cutters up to 1.00". |
 |
| Double Angle Collet Extensions For use with Command Collet Chucks. Double Angle Collets are interchangeable with Erickson-type collets. Four series for tool shanks ranging from .031" to .750". |
 |
| Blue Chip™ Coolant Containment System for Collet Chucks Contains and directs coolant to the tip of the tool where it is needed. Seals coolant tools from .12" to 1.02" (3.0 to 26.0 mm). Sizes available for all Micro Precision®, Select XT Precision™ and select Comflex® Collet Chucks. |
 |
| End Mill Holders Full range of side locking end mill holders with fine thread screws - matching Weldon flats - to lock tight and stay tight. Available for end mill shank diameters ranging from .50" to 2.00" and 6 to 20 mm. |
 |
| Hydracentric™ Hydraulic Holders Powerful hydraulic grip with slim nose design. 5 times the radial repeatability of competitive designs. |
 |
| ThermoLock® Shrink-Fit Holders and Accessories Maximum tool-gripping strength and machining accuracy. Thermolock® Toolholders are heated to load and unload the cutting tool |
 |
| Shell Mill Holders Designed for precision fit with cutter. Pilot diameter sizes ranging from .75" to 2.000" available. Removable/replaceable drive keys are standard. |
 |
| Tap Holders Tension-Compression style has axial float for precise thread pitch. Holders travel in tension .75" / compression .37". Synchronous (Rigid) Tap Holders are for new machine controls. Both styles use popular Bilz style quick change collet system |
 |
| Boring Head Holders Holders available with various threaded connections to adapt to popular boring heads. |
 |
| Jacobs and Morse Taper Holders Jacobs taper held to better than .0002" accuracy for best mating with the drill chuck. Morse taper pocket held to .0002" accuracies for the best locking fit of the Morse shank. These holders are not for high speed use. |
 |
| Semi Flush Slitting Saw Designed for slitting saws up to 5/16" thick (for wider cutters use Stub Arbour Holders). Semi flush nose cap gets in tight areas. Available for Saw Size ID of 1.00" & 1.25". |
 |
| Stub Arbour Holders Stub Arbour Toolholders come complete with heavy duty locking nut and three arbour spacers (1/4", 3/8", 3/4"). Available for Cutter Size ID of 1.00" and 1.25". |
 |
| Blank Bars Blank Bar nose is machinable for making custom and emergency holders. Shank and flange are case hardened and precision ground. |
 |
