|
||||||||||
 Cyclematic CTS-27-EVS Second operation lathe with turret tailstock |
 |
The CTS-27-EVS second operation turret lathe is a clone of the Hardinge DSM59 that is normally supplied with the turret tailstock and a double tool cross slide. The spindle is powered by an American made vector drive that is installed and tuned in our shop. Spindle speeds are set electronically and shown in an LED display. The vector drive replaces the old vari-disk system, giving smoother operation and almost zero maintenance. |
 |
Options include a digital readout system and Constant Surface Speed  |
 |
||
| Spindle Capacity | ||
| With Jaw Chucks | 150 mm 6" |
|
| With Expanding Collets | 76 mm 3" |
|
| With Round 5C Collets | 27 mm 1-1/16" |
|
| With Step Chuckes | 27 to 152.4 mm 1 1/16 - 6" |
|
| Spindle Nose Diameter | 55.6 mm 2.189" |
|
| Bar stock diameter (5C collet) | 27 mm 1-1/16" |
|
| Hole through spindle | 31.75 mm 1-1/4" |
|
| Variable Spindle Speeds | 50 - 4,000 RPM |
|
| Optional Spindle Speeds | 75 - 6,000 RPM |
|
| Inverter Spindle Motor | 3HP |
|
| Spindle Nose I.D/O.D | 5C 10° / 4 ° Taper |
|
| Double Tool Cross Slide Travel | 95 mm 3-3/4" |
|
| Travel of Double Tool Cross Slide | 101.6 mm 4" |
|
| I.D. of Turret Head | 15.875 mm 5/8" |
|
| Swing Over Bed | 229 mm 9" |
|
| Main Motor | 3HP |
|
Power supply |
230/3/60 or 220/1/60 |
|
| Coolant Pump | 1/8 HP,220V,3PH |
|
| Net Weight (approx) | 990 lbs. 450 kgs |
|
| Gross Weight (approx) | 1364lbs 620 kgs |
|
| Machine dimensions L x W x H | 1750 x 700 x 1600 mm 69" x 28 " x 63 " |
|
