HH Roberts Machinery Ltd logo
Questions ?
Call us at 905-624-5536
H.H. Roberts Machinery Limited
1324 Matheson Blvd E., Mississauga, Ontario, Canada. L4W-2Z7, Fax 905-624-9065

Straing and taper turning slide for double tool cross slide

Straight and Taper Turning Slide for
Double Tool Cross Slide

This attachment can be used on the front or rear of the double tool cross slide. It is for straight or angular turning, back facing, under-cutting or for turning long slender parts that cannot be readily formed by a full width tool Two of the attachments may be mounted on the double tool cross slide for turning or boring tow different angles at on setting of the work, such as valve setas or bevel gears. The swivel base is graduated in degrees and can be swiveled and locked to any angle. The lever operated rack and pinion slide travel of 1 3/4" is controlled in either direction by adjustable stops. The tool post takes standard 5/16" square tool bits.

Tool No:CTS-27-07

For Cyclematic lathe models:

Click here to return to the Options selection page