Questions ?
Call us at 905-624-5536
HH Roberts Machinery logo
male H.H. Roberts Machinery Limited
1324 Matheson Blvd E., Mississauga, Ontario, Canada. L4W-2Z7, Fax 905-624-9065
credit card logos
Shanghai Z-5040    1.58" drill press
Shanghai Z-5040 Geared Head Drill with Power Feeds and Semi-automatic Tapping Cycle
Drilling capacity 1.58" 40 mm
Tapping capacity 1.06 " M27
Diameter of column 6.32" 160 mm
Spindle travel 9.49" 240 mm
Distance spindle axis to column 14.23" 360 mm
Max.Distance spindle nose to table 23.6" 600 mm
Max.Distance spindle nose to base 47.43" 1200 mm
Spindle taper MT4
Spindle speed range 42 ~ 2050 RPM
Number of spindle speeds 12
Spindle feeds 4
Feed rates 4, 8, 12 and 16
thou / rev
0.1, 0.2, 0.3, 0.4
mm / rev
Worktable surface 20" x 15 " 510 × 380 mm
Adjustment of worktable 16.54" 420 mm
Base surface 17" x 17.3" 450 × 440 mm
Worktable and base T-slots 2-14mm and 2-18mm
Main motor - 2 speed 2.9 / 3.7 Hp 2.2 / 2.8 Kw
Coolant motor ( optional ) 1.6 US GPM 6 L / min
Net Weight 1,518 Lb. 690 Kg.
Packing dimennsions 37" x 22.44" x 84.65" 110 × 67 × 215 cm

Shanhia Z5040 geared head drill with power feeds
Features and Standard Equipment

• Geared headstock with hardened and ground steel gears
• Four power feeds actuated by pushbuttons in each feed lever, engaged by
      electromagnetic clutch with release built into the depth gauge.
• Semi-automatic tapping cycle. The spindle runs forward to tap and reverses when the
      pushbutton  in the feed lever is pushed, then reverses again at the top of the stroke,
      ready for the next hole.
• Worktable can be rotated ±180°and tilted ±45°
• Both motor-driven and manually operated lifting system of worktable
• Coolant system


• Adjustable depth stop with inch and metric scales
• Table has double acting linked clamps with safety interlock to power elevation
• Drill speed chart for iron and steel on faceplate
• Drill chuck safety guard with built in switch to CE standards.
• Available with 600/3/60 electrics, CSA approved, and 230/3/60
• Standard equipment includes a MT4-3, MT4-2 and MT2-1 sleeves, drift, anchor bolts and manual.
• Built in worklight
• CE, CSA, UL approved main electrical components
power table elevation on Shanghai Z5040 drilling machine
Power elevation for the table is standard
on this model.

Digital vernier on spindle of the drill press
Digital verier on the spindle is standard on this model