|
Shun Chuan TML Series: 16.14" Swing |
Made in Taiwan Roberts Machinery has been selling Shun Chuan lathes for over 15 years |
FEATURES | |
All casting are properly stabilized and stress relieved. | |
Bed ways are hardened & ground to min. HS-70 | |
Turcite B coating between the bed and carriage. | |
Extremely low noise level. | |
Foot brake paddle provied. | |
Built-in coolant pump & fitting provided. | |
Wider bed way which give vibration-absorbent. |
TML-1640 | TML-1660 | ||||||||||||||||||||||
Capacity | Height of centers | 205mm 8.07" | |||||||||||||||||||||
Swing over bed |
410mm 16.14" |
||||||||||||||||||||||
Swing in gap | 583mm 22.95" | ||||||||||||||||||||||
Swing over cross slide | 264mm 10.39" | ||||||||||||||||||||||
Distance between centers | 1000mm 40" |
1500mm 60" | |||||||||||||||||||||
Width of bed | 260mm 10.236" | ||||||||||||||||||||||
Gap width in front of faceplate | 135m 5.31" | 225mm 8.85" | |||||||||||||||||||||
Headstock & Main spindle |
Spindle nose, Internal taper | D1-6 , MT. No.6 | |||||||||||||||||||||
Spindle center sleeve | MT. No.6 x MT No.4 | ||||||||||||||||||||||
Spindle bore | 52.5mm 2.066" | ||||||||||||||||||||||
Spindle speed: Gear steps/Range |
|
||||||||||||||||||||||
Carriage | Length on bed / Width of carriage | 513mm (20.19") / 412mm (16.22") | |||||||||||||||||||||
Cross slide travel | 220mm (8.6") | ||||||||||||||||||||||
Top slide travel | 140mm (5.5") | ||||||||||||||||||||||
Threads & Feeds |
Whitworth threads: Kinds/Range | 45 Kinds / 2 ~ 72 T.P.I. | |||||||||||||||||||||
Metric threads: Kinds/Range | 39 Kinds / 0.2 ~ 14mm | ||||||||||||||||||||||
D.P. threads: Kinds / Range | 21 Kinds / 8 ~ 44 D.P. | ||||||||||||||||||||||
M.P. threads: Kinds / Range | 18 Kinds / 0.3 ~ 3.5 M.P. | ||||||||||||||||||||||
Longitudinal feeds | 0.05 ~ 17 mm (0.002" ~ 0.0067") | ||||||||||||||||||||||
Cross feeds | 0.025 ~ 0.85 mm (0.001" ~ 0.034") | ||||||||||||||||||||||
Tailstock | Quill diameter | 52mm (2.047") | |||||||||||||||||||||
Quill travel | 152mm (6") | ||||||||||||||||||||||
Taper of center | MT. No.4 | ||||||||||||||||||||||
Motor | Main spindle | 5HP | |||||||||||||||||||||
Coolant pump | 1/8HP | ||||||||||||||||||||||
Measurement | Weight (Net / Gross) Approx. | 1500kgs / 1650kgs | 1600kgs / 1750kgs | ||||||||||||||||||||
Packing sizes | Length | 2270mm (89.4") | 2785mm (109.7") | ||||||||||||||||||||
Width x Height | Width 1120mm (44.1") x Height 1745mm (68.7") | ||||||||||||||||||||||
Specification subject to change without notice |
Options: the picture below shows and ERL model with several options: - 5C collet closer - rear splash guard with work light - chuck guard - sliding toolpost guard ( requires the rear splash guard) - leadscrew cover - live center |