 |
Questions ? Call us at 905-624-5536 |
|||||
| H.H. Roberts Machinery Limited 1324 Matheson Blvd E., Mississauga, Ontario, Canada. L4W-2Z7, Fax 905-624-9065
|
||||||
Topwell
3-GL and 4-GL CNC Knee Mills 2 to 5 Axis |
All these models are available with Anilam, Acu-rite Millpwr, Fanuc, Fagor and Mitsubishi CNC |
| 6,000 RPM, direct drive or back geared heads. 24" or 32" X 15" travels 4 1/2 Hp vector drive head R-8, # 30, Cat-V-40, BT-40 spindles The 4-GL looks almost the same as the 3-GL when fully assembled, but the 4-GL has a wider saddle (22" ) for better support and has box ways on the cross slide and column that give considerably more surface area of the slideway. Available with your choice of direct belt drive or optional back geared head giving speeds of 15 to 750 RPM in low and 100 to 6,000 in high. |
 The 4-GL 3 axis CNC knee mill with standard table and table end tray. |
 4-GL 3 axis CNC knee mill with space saver table. this is an older photo with the Anilam CNC |
This new table and motor mount with floorspace saving design is available with a standard or shorter table and has the X axis motor mounted in front of the table, under the black chip guard The shorter 42" table version saves 22" of floor space and still approx. 24" of X axis travel. With the 50" x 12" full size table the travel is about 32" and saves about 11" of floor space. This series was developed for colleges that have limited floor space Download our catalog for our CNC knee mills |
 |
The Acu-rite CNC control is one of the easiest on the world to learn
and use. This pictue shows a 3 axis system. The quill kit has
a patented clutch release so the operator can uncouple the ballscrew and
drive to use the quill manually with the lever control. This picture shows a machine done up with all the bells and whistles including - air power draw bar - telescoping guards on the Y axis - table end tray on the left side of the table - special Italian handwheels on X and with folding grips - chip pan and splash guard - manual pulse generator - Y axis motor mounted inside the knee |
| Table surface | 12" x 42" short table version |
12" x 50" |
| X axis stroke | 24" |
32" |
| Stationairy distance Left to right with end tray design | 62 3/4" |
70 3/4" |
| Floor space for full X axis stroke with end tray design | 86 3/4" |
102 3/4" |
| Stationairy distance Left to rignt with space saving design | 51 1/2" |
59 1/2" |
| Floor space for full X axis stroke with space saving design | 75 1/2" |
91 1/2" |
| Spindle power ( intermittent duty cycle ) | 4 1/2 Hp |
|
| Spindle taper | R-8, #30 or # 40 # 30 and 40 spindles can be configured for Cat-V or BT tools |
|
| Spindle speeds - direct drive head | 75 to 6000 rpm |
|
| Spindle speeds - optional back geared head | 15 to 750 and 100 to 6,000 |
|
Available with:
  HH Roberts now offers the Acu-Rite Millpwr CNC control. This has to be the easiest CNC to run, program and make money with.. Details: |
