|
||||||||||
 |
 |
BS - 400 SA |
BS - 450 SA | BS - 1830 | ||
| Cutting Capacity | mm | Ø400 400 x 310 |
Ø460 460 x 407 |
Ø460 460 x 760 |
| in | Ø16" 16" x 12" |
Ø18" 18" x 16" |
Ø18" 18" x 30" |
|
Mitre Cutting |
mm | Ø280mm at 45° |
Ø320mm at 45° |
Ø460mm at 45° |
in |
11" |
12.6" |
18.1" |
|
Biade Size |
mm | 34 x 4115 |
41 x 4670 |
41 x 5300 |
| in | 1¼ x 162 |
1½
x 184 |
1½ x 209 |
|
Blade Speed: |
m/min | 25,32,42,55,70,80 Variable Speed 20 - 80 M / min |
25,32,42,55,70,80 Variable Speed 20 - 80 M / min |
25,32,42,55,70,80 Variable Speed 20 - 80 M / min |
| ft/min | 82,105,138,180,230,260 Variable Speed 65 - 260 Ft / min |
82,105,138,180,230,260 Variable Speed 65 - 260 Ft / min |
82,105,138,180,230,260 Variable Speed 65 - 260 Ft / min |
|
Motor Output |
kw | 4.6 |
6.47 |
6.47 |
| hp | 6 - 1/8 |
8 -5/8 |
8 - 5/8 |
|
Shipping Volume |
mm | 2225 x 1188 x 1525 |
2680 x 1220 x 1980 |
3000 x 1220 x 1980 |
| ft | 7.3 x 3.9 x 5 |
8.8x4.0x 6.5 |
9.8x4.0x6.5 |
|
Weight Net / Gross |
(kb)(lb) | 1060 / 1275 2330 / 2805 |
1500 / 1750 3300 / 3850 |
1650 / 1910 3630 / 4205 |
| Features • Carbide and roller blade guides • Automatic head elevation control • Power-driven blade cleaning brush • Hydraulic quick-setting vise • Coolant cleaning flush hose • Uniqe floating roller feed mechanism. • Quick-adjusting carbide saw guide (450 & 1830) • Pressure compensation feed-rate control. |
Standard equipment | |
| • Tool with tool box | 1 set | |
| • 5ft (1.5M) long roller table | 1 set | |
| • Cut-off bar end stopper | 1 set | |
| • Band-Cleaning wire brush | 2 pcs | |
| • Band saw blade | 1 pc | |
| • Instruction manual | 1 copy | |
| Options • Automatic chip conveyor. • Variable blade speed drive. • Mitre cutting device. • Hydraulic blade tension. • Additional roller table. |
||
 |
CENTRALISED CONTROL PANEL: All the machine controls are centralised on a control panel, for the operator's convenience. |
|||||||||||||||||||||||||||||||||||||||||||||||||||||
| QUICK ACTING MECHANICAL BLADE TENSION. A torque release device is built into the saw to ensure proper tension on the saw blade. Optional hydraulic blade tension also available. |
 |
|||||||||||||||||||||||||||||||||||||||||||||||||||||
 |
BLADE GUIDE DESIGN: The saw blade is guided by 4 ball bearings and 6 carbide guides to ensure perfect alignment and straightness. |
|||||||||||||||||||||||||||||||||||||||||||||||||||||
| POWER DRIVEN SAW BAND BRUSH: A power-driven saw-band brush, continually flushed by a cutting fluid spout, keeps the blade and saw guides free of chips for smoother cutting. A flush hose is available for washing chips and debris away from the cutting area. |
 |
|||||||||||||||||||||||||||||||||||||||||||||||||||||
 |
HYDRAULIC QUICK-ACTION VISE: Vise are hydraulic operated. tooth-rack and push-jaw features. eadily adjusted to accommodate stock size |
|||||||||||||||||||||||||||||||||||||||||||||||||||||
| FLOATING ROLLER FEED MECHANISM: With joy stick setting control of vise and floating roller. when opening the vise. the roller comes up. by a hand wheel can feed solid stock. no sweat! |
 |
|||||||||||||||||||||||||||||||||||||||||||||||||||||
 |
AUTOMATIC HEAD ELEVATION CONTROL: Saw frame will raise automatically up to the height that you preset by a dial knob on the control panel, needed to clear the material being cut. |
|||||||||||||||||||||||||||||||||||||||||||||||||||||
| UNIQUE FEED-RATE CONTROL: This unique feed-rate control system with built in temperature and pressure compensation ensures maximum cutting performance. The feedrate control will maintain a constant cutting rate regardless of the work diameter. |
 |
|||||||||||||||||||||||||||||||||||||||||||||||||||||
 |
 |
|||||||||||||||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Specifications subject to change without notice for improvement and modification. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
