 |
Questions ? Call us at 905-624-5536 |
|||||
| H.H. Roberts Machinery Limited 1324 Matheson Blvd E., Mississauga, Ontario, Canada. L4W-2Z7, Fax 905-624-9065
|
||||||
| MODEL | DY-410G |
DY-460G |
DY-510G |
||
| Swing | Distance between centers | 1100 / 1600 / 2100 / 3100 mm |
|||
| Swing over bed | 410mm |
460mm |
510mm |
||
| Swing over cross slide | 230mm |
270mm |
320mm |
||
| Swing in gap | 660mm |
710mm |
760mm |
||
| Height of center (over bed) | 205mm |
230mm |
255mm |
||
| Bed | Width | 330mm |
|||
| Headstock | Spindle nose | D1-6 |
D1-6: 63mm D1-8: 80mm / 102mm(Opt.) |
||
| Spindle bore | 63mm |
||||
| Spindle speed (rpm) | D1-6: 36~2000 rpm / D1-8:
36~1500rpm |
||||
| Number of spindle speed | 12 Change |
||||
| Feeds and threads |
Leadscrew | Ø35 mm. 4T.P.I. or 6 pitch |
|||
| Number of feed changes | 32 |
||||
| Longitudinal feed range | 0.04~1.0 mm |
||||
| Cross feed range | 0.02-0.5mm/rev |
||||
| Inch threads | 45 kinds 2~72 T.P.I. |
||||
| Metric threads | 39 kinds P0.2~14 |
||||
| D.P. No. / range | 21 kinds D.P 8~44 |
||||
| Module pitches No. / range | 18 kinds M 0.3~3.5 |
||||
| Tool slide | Cross slide travel | 260 mm |
|||
| Compound rest travel | 127 mm |
||||
| Tailstock | Quill travel | 130mm |
|||
| Quill diameter | 63mm |
||||
| Taper of center | MT#4 |
||||
| Motors | Main motor | 7.5HP / 10HP(OPT) |
|||
| Coolant pump | 1/8HP |
||||
| Packing size | L x W x H (mm) | 1100mm |
1600mm |
2100mm |
3100mm |
| DY-410G | 2370
x 1100x 1700 |
2880
x 1100 x 1700 |
3400
x 1100 x 1700 |
4410
x 1100 x 1700 |
|
| DY-460G | 2370
x 1100 x 1750 |
2880
x 1100 x 1750 |
3400
x 1100 x 1750 |
4410
x 1100 x 1750 |
|
| DY-510G | 2370
x 1100 x 1800 |
2880
x 1100 x 1800 |
3400
x 1100 x 1800 |
4410
x 1100 x 1800 |
|
| Weight (approx.) | NW / GW | 2000
/ 2150 kg |
2300
/ 2450 kg |
2800
/ 3000 kg |
3800
/ 3650 kg |
 Annnyang 18" x 44" lathe |
 |
 |
 This picture shows the one piece base casting used on both the CNC and manual 16", 18" and 20" series lathes. |
