Topwell bed mills with 40" or 50" travel, up to 15 Hp

Questions ?
Call us at 905-624-5536.

H.H. Roberts Machinery Limited
1324 Matheson Blvd E., Mississauga, Ontario, Canada. L4W-2Z7, Fax 905-624-9065

TW-32,TW-40 and 50-VF Bed Type Milling Machines

Topwell TW32QVF bed mills 12" x 50" table. 20" vertical travel with tilting head 7 1/2 to 15 Hp vector drive spindle. These are both available with a quill type head and 7 1/2 to 15 Hp drive as shown on the TW-32-QVF Cat-V 40, BT-40 or NMTBA 40 spindle Acu-Rite 3 axis digital readout is standard ballscrews on all axes coolant system with chip pan and side splash guards worklight automatic timed lube system hardened and ground table top and slideways withTurcite counterslides. More details and versions.
Topwell TW-40-VF Milling Machines 59" x 13" or 59" x 18" table. 7 1/2 to 15 Hp vector drive spindle. The head is the same as those used on our machining centres This model is also available with a 40" X axis travel on the TW-40-MVF These are both available with a quill type head and 7 1/2 to 15 Hp drive as shown on the TW-32-QVF Cat-V 40, BT-40 or NMTBA 40 spindle Built in digital readout with easy upgrade path to CNC because each axis already has CNC class servo feeds installed. ballscrews on all axes coolant system with chip pan and side splash guards worklight automatic timed lube system hardened and ground table top and slideways with Turcite counterslides.	6000 RPM. Your choice of back geared or direct drive heads. TW-40-QVF
Topwell TW-50 MV-VF Milling Machines Generally as above but with wider saddle and table having 50" of X axis travel Table is 68" x 18" Now available with 11 1/2 or 15 Hp spindle drives on the quill head models. Field upgrades are available for customers with machines and heads.	TW-50-MV-VF up to 12,000 rpm
	To the left is the control pendant for the VF series. The current models come with the Acu-Rite LCD graphical digital readout as standard equipment. Controls on the Panel: At the top left is the spindle speed display. Under the display is the speed setting knob and the forward - stop - reverse switch. In the middle and are under the white safety bar making them a bit hard to see are the joysticks for axis selection Just below the joysticks are the geared knobs for sensitive feed rate setting. Feed rates are displayed on the digital readout. On the knee mills X and Y have the feed knobs and the vertical knee lift just had the joystick for rapid positioning. On the bed mill versios all 3 axes have feed knobs. Below the feed knobs are the yellow buttons for the rapid traverse for each axis. The lower switches are for the worklight and coolant on the left and an E-stop on the right.