HH Roberts Machinery Ltd logo Questions ?
Call us at 905-624-5536
H.H. Roberts Machinery Limited
1324 Matheson Blvd E., Mississauga, Ontario, Canada. L4W-2Z7, Fax 905-624-9065
asdf   asdf

Download the Erlo full line catalog
Erlo Geared head drills HH Roberts has been the exclusive Canadian agent
for Erlo Drill Pressessince 1967
Erlo TS series geared head floor drill press Erlo TS Series Drill Presses
TheTS series of drills from Erlo are the most economical of the geared head types.
All the spindle drive gears are hardened and ground and run in an oil bath.
These drills are available with or without power feeds.
Optionally they can be equipped with the Hidroblock Automatic spindle cycling feeds for higher production applications

Download the Erlo TS series catalog

Need parts or parts manuals ??   Click Here to download manuals.

TS-25, 30, 32 and 35 models  Manual Feed,
Erlo TS-25 Geared head floor drill press
TS-25		 Erlo TSA-25 Geared Head Pedestal Drill with power feeds
TSR-25		 Erlo TS-25 Drill Press
1" and 1.2" capacity
Geared head drill press with manual feed
Erlo TS-32 geared head floor drill
TSR-32		 Erlo TS-32 and TS-35

a Geared head drill press with manual feed, without built in coolant.

(TRS version with coolant shown)
  TS-25 TS-30 TS32 TS-35
Drilling capacity in mild steel 25mm
1" 		30mm
1 3/16"		 32mm
1 1/4"		 35mm
1 3/8
Tapping capacity M.22 M.25 M.28 M.30
Transmission hardened and ground steel gears
Feed Manual (Hydroblock Auto-Cycle optional)
Number of feeds None
Speed range 8 speed from  78 to 3672 8 from 90 to 2520
Spindle motor, 2 speed 1.1  /   1.6 Hp 1,5  /  1.9 Hp 1 / 1.5 Hp 1.2 / 2 Hp
Spindle taper MT 3  MT 4
spindle stroke 120 mm
4.72"		 160mm
6.3"
Spindle C/L to face of column 250 mm
9.84"		 300mm
11.8"
Column diameter 100mm
4"		 125mm
4.9"
Worklight Optional
Rotating and tilting table Optional
Built in tool ejector Yes
Coolant system Optional  Model designator becomes TSR
Low voltage control panel Yes
Sensitive feed handwheel Optional
Adjustable depth stop Yes

TSA 25, 30, 32, 35, 40 and 45  Power Feed models
Models with coolant system are denominated as TSAR
  TSA 25 TSA 30 TSA.32 TSA.35
TSA 40 TSA 45
Drilling capacity in mild steel 25mm
1"		 30mm
1 3/16"		 32mm
1 1/4" 		35mm
1 3/8"		 40mm
1 9/16"		 45mm
1 3/4"
Tapping capacity M.22 M.25 M.28 M.30 M.32 M.35
Transmission hardened and ground steel gears
Feed / clutch Automatic / mechanical
Number of feeds 2 3
Spindle speeds  ( 8 ) 78 - 3672 90 - 2520 112 - 1704
Spindle motor 1.1 / 1.6 Hp 1.5 / 1.9 Hp 1 / 1.5 HP 1.2 / 2 HP 2 Hp 3 Hp
Spinidle taper 3 Morse 4 Morse
spindle stroke 120mm
4 3/4"		 160 mm
6.3"		 180mm
7"
Spindle C/L to face of column 250mm
9.84"		 300 mm
11.8"		 350mm
13.78'
Column diameter mm. 100mm 125mm
4.92"		 150mm
Worklight     Optional      
Rotating and tilting table     Optional      
Built in tool ejector     Yes      
Coolant system Optional   model becomes TSAR
Low voltage control panel Yes
Sensitive feed handwheel Optional
Adjustable depth stop Yes
Tool ejector Yes
             

TSE
Erlo TSE-32 Geared Head floor drill press with electromagnetic clutch feeds

TRS-32 shoiwn with coolant		 Erlo TSE geared head drill presses
with electromagnetic feed clutch
  TSE-32 TSE-35
Drilling capacity in mild steel 32mm
1  1/4"		 35mm
1  3/8"
Tapping capacity M.30 M.32
Transmission hardened and ground steel gears
Feed / clutch Automatic / Nechanical
Number of feeds 3
Spindle speeds 8 from 90 to 2520 rpm
Spindle motor 1 /  1.5 Hp 1.2  /  2 Hp
Morse taper MT.4
spindle stroke 160 mm
6.3"
Spindle C/L to face of column 300 mm
11.8"
Column diameter mm. 125mm
4.92"
Worklight Optional
Rotating and tilting table Optional
Built in tool ejector Yes
Coolant system Optional:  model become TSR
Low voltage control panel Yes
Sensitive feed handwheel Optional
Adjustable depth stop Yes
<