 |
Questions ? Call us at 905-624-5536 |
|||||
| H.H. Roberts Machinery Limited: 1324 Matheson Blvd E., Mississauga, Ontario, Canada. L4W-2Z7, Fax 905-624-9065
|
||||||
|
|||||||||||
| Only the underlined links in the column below have documents available for downloading at this time. More are being added as the site develops. |
| Trademarks | Links | Comments |
| Argo, Li Chang, and other mills | the parts books for almost
all Taiwan clones of Bridgeport mills are identical to this and many of
the parts are interchangeable. If you have a Taiwan clone, we may
be able to help you. Most parts in stock. |
|
| Auto Wells hydraulic vises | 6" models | on line, most parts in stock |
| Baxter - Verticut saws | Verticut band saws newer models | on line, most parts in stock |
| Verticut band saws older models | ||
| Cyclematic lathes | ||
| Cyclematic CTL-618 Toolroom lathe parts list | on line, some parts in stock | |
| Clutch assembly of 618 lathe clener diagrams than in above | on line, clutch discs normally in stock | |
| Cyclematic CT-1118 Toolroom CNC lathe parts list | not on line yet, some parts in stock | |
| Cyclematic CT-606 Gang tooling CNC lathe manual | not on line yet, some parts in stock | |
| Darbert ( King Rich ) mills | we have many parts in stock that will fit King Rich ( Darbert ) mills we can get other |
we have parts manuals for some models. |
| Darex drill grinder / sharpener parts | We have parts in stock for the SP-2000 and SP-2500 sharpeners | |
| Davis keyseaters | ||
| Davis # 4 Keyseate manual and parts list | please send us an email and we'll send a pdf to you | |
| older Davis #5 Keyseater manual and parts list | please send us an email and we'll send a pdf to you | |
| Enterprise lathes | E-10 | 10" swing lathe, many parts in stock, shop drawings |
| Enterprise 1330 | 13" swing lathe, many parts in stock shop drawings | |
| Enterprise 1550 | 15" swing lathe, many parts in stock shop drawings | |
| Enterprise 1675 | 16" swing lathe, many parts in stock shop drawings | |
| Enterprise 1810 | 18" lathes, many parts in stock, shop drawings | |
| Enterprize 2215 | 22" lathe, many parts in stock, shop drawings | |
| Kirloskar Western lathe | 13" swing, many parts in stock, shop drawings | |
| we have complete shop drawings for Enterprise lathes and can get parts quickly that we do not have in stock | ||
| Erlo drills : common parts in stock | ||
| Coolant pumps for Erlo drills | ||
| Erlo TC-25 and TC-30 drill press parts manual | Spanish version only is available | |
| Erlo TC-32 and TC-35 drill press parts manual | Erlo parts books display some pages small put they print OK. | |
| Erlo TCA-25 and TCA-30 drill press parts list | see above note | |
| Erlo TCA-32 and TCA-35 drill press parts manual | see above note | |
| Erlo TCA-40 and TCA-45 drill press parts and instructions | see above note | |
| Erlo TCA-50 drill press parts manual | see above note | |
| Erlo TCA-60 drill press parts manual | see above note | |
| Erlo TCA-70 drill press parts manual | call us | |
| Erlo TS and TS-R 25 and 30 drill press parts manual | see above note | |
| Erlo TSA and TSA-R 25 and 30 drill press parts list | see above note | |
| Erlo TS TSA TSE 32 drill press parts manual | ||
| Fexac milling machine parts | ||
| we have many parts in stock | sorry, no manuals on line, please call | |
| Forte Bandsaws | ||
| Forte F250 Bandsaw | some parts in stock, we have friction rings, fibre gears, coolant pump parts, some guide parts and ONE hydrualic cylinder that is old stock and available at a fraction of the the cost of a new factory cylinder. new factory parts are available |
|
| Forte BA-251 Automatic Bandaws | some parts in stock, most parts are common to the F250 above. manuals not on line yet |
|
| Forte F300 Bandsaw | some parts in stock, manuals not on line | |
| Forte 400 bandsaw | some parts in stock, manuals not on line | |
| Fresmak, Arnold and Dapra hydraulic vise parts | ||
| Fresmak older models (1970 to 2002 ) | on line and parts in stock | |
| Fresmak newer models (2002 +) | on line and parts in stock | |
| Fresmak operator's manual | on line | |
| Geminis lathe parts | we have clutches, leadscrews and other parts in stock and can get other parts as needed | |
| Grob bandsaws | ||
| Dynamic braking now available to retro-fit to Grob saws for new health and safety rules - call us. | ||
| Guide systems | Grob Advantages of single piece guides | on line with common parts in stock |
| GrobGuide systems literature | on line with common parts in stock | |
| Grob Guides and holder drawings | on line with common parts in stock | |
| Grob Single Peice Guide color codes | on line with common parts in stock | |
| General parts | Grob 4v18 Operator's manual | zip file of complete manual opens into several .jpg files |
| Grob Gearbox Assembly 4V18, 24, 36 and 60 | on line with common parts in stock | |
| Grob Feed Control and regulator all 4V models | on line with common parts in stock | |
| Grob Feed Rod Clamp Assy All 4V models | on line with common parts in stock | |
| Grob 4V18 main assembly parts list | on line with common parts in stock | |
| Grob 4V18 upper wheel assembly | on line | |
| Grob 4V24 | not on line yet | |
| 4V36 main assembly parts list | on line with common parts in stock | |
| Grob 4V36 upper wheel assembly | on line | |
| 6V36 | not on line yet | |
| Rubber Tire replacement instructions | on line | |
| Hansford Die Cats | ||
| MSE series | on line operation manual and parts list | send us an email and we'll send you a pdf file |
| Huron milling machines | ||
| KU-3, KU-4, KU-5 | Parts available, some in stock | not on line, please call |
| huron 2809 | used rack cutting attachment | |
| MU-3, MU-4, MU-5, MU-66 | We have a horizontal attachment in stock for the NU and KU series of Hurons mills that have a single column at the front of the table |
|
| CFN-083 | long over arm support for horizontal milling | |
| IMA drills | ||
| IMA I-30 (M) drill press manual and parts list | on line | |
| IMA I-35 (M) drill press manual and parts list | on line | |
| IMA I-35-ELM drill press manual and parts list | on line | |
| IMA I-40 drill press manual and parts list | on line | |
| IMA I-40-el supplement for drills with autoreverse | on line | |
| IMA I-40-el supplement for drills without autoreverse | on line | |
| IMA I-40 (M) suplement for drills with power feed box | on line | |
| IMA IG (M) 30-8 drill press parts and instruction manual | on line | |
| Maxi
Torque Rite power draw bars |
all models | on line, 13 individual pages we have parts in stock |
| Mazak | some parts for Mazak lathes in stock | parts manuals are not on line |
| Mazak electromagnetic clutches and brakes | parts available now from Japan | |
| Metba | a few parts in stock, almost all parts available from Spain | parts manuals are not on line |
| Nider drills | ||
| NI-25 | Nider NI-25 drill press parts and instructions manual | send us an email and we'll send you a pdf file |
| NI-25 CSA | Nider NI-25 drill press with CSA electrics | send us an email and we'll send you a pdf file |
| NI-25-1 | Nider NI-25-1 drill press parts with CSA electrics | send us an email and we'll send you a pdf file |
| NI-25-M | Nider NI_25-M drill press with power feed | send us an email and we'll send you a pdf file |
| NI-35 ( M ) | Nider NI-35 and NI-35-M drill press parts | send us an email and we'll send you a pdf file |
| NI-35-M | supplement for NI-35-M drill press with power feeds | send us an email and we'll send you a pdf file |
| NI-40 | this is the same machine as the Solberga SE1735 | on line |
| NI-50-B | Nider NI-50-B geared head drill is the same machine as Solberga SE1630 |
The NI50 is the same machine as the Solberga SE1630. |
| NI-64/E2 | only a few spindle return springs left in Sweden as of Feb 2014 no other parts are available from the factory but we can custom make the fibre gears here. |
not available |
| NI-70 | parts are no longer available for this very old series | |
| Okuma LS lathe parts | some parts and accessories in stock (incl steady and follow
rests ) We have a limited supply of rebuild kits for the Okuma LS 21" series lathes |
|
| Solberga drills, ( aka Willis Solberga ) | ||
| AS50 and 55 | Solberga AS-50 and AS-55 drill press parts manual | available on request, send us an email |
| SE-1235 | last produced in 1980 | we can custom make gears for these old machines |
| SE-1340 | Solberga SE-1340 drill press parts manual | available on request, send us an email |
| SE-1630 | Solberga SE-1630 drill press parts manual | available on request, send us an email |
| SE-1735 | Solberga SE-1735 drill press parts manual ( same machine are Nider NI40 ) |
on line |
| SE-2025 older models | Solbergra SE2025 drill press parts manual older models. | on line |
| SE-2025 | Solberga SE-2025 drill press parts manual newer models | on line |
| SE-2025-M supplement | Power feed gearbog supplement for the Solberga SE-2025-M | available on request, send us an email |
| SE-2025 - and SE-2025-M 120 V | Solberga SE-2025 drill press with 120 Volt motors - | available on request, send us an email |
| SE-2025-T | Solberga SE2025-T drill press parts and instructions manual | available on request, send us an email |
| SE-2030 | See the Strands S28 | parts are interchangeable with Strands S28 |
| SE-2050M | Solberga SE2050 drill press parts and instruction manual | available on request, send us an email |
| SE-25 and 35 auto-reverse | Wiring digaram supplement for SE25 and 35 with auto-reverse | available on request, send us an email |
| SE-2035 (M) main machine | Soleberga SE-2035 machine manual for SE-2035M with power feed see below |
on line |
| SE2035M power feed mechanism | power feed pats for above machine | available on request, send us an email |
| SE-725 | Solberga SE-725 drill parts | available on request, send us an email VERY FEW PARTS AVAILABLE |
| Strands drill presses | ||
| AS-50 and AS-55 | Stands AS-50 and 55 manual | on line |
| CS-30-3 | Strands CS-30-3 drill press parts and instruction manual | on line gearshift arms arm tapered levers |
| CS-30-3 | Strands CS-30-3 drill press parts | on line gearshift arms with round balls |
| MDW-3000 and MDW-4000 | call | |
| MDW-3000-AMC and MDW-4000-AMC | call | |
| S-25 | Strands S25 manual and parts list | on line |
| S-25 current wiring | S25 wiring with chuck guard | on line |
| S-25 120 volt | Strands S25 manual and parts list | on line |
| S-25-T | Strands S-25-T manual and parts lists | on line |
| S-25-U | Strands S-25-U universal mill / drill manual and parts list | on line |
| S-28-M Flex | Strands S-28-M FLEX drill press manual and parts list | on line |
| S-28 | Strands S-28 drill press parts and instruction manual | on line |
| S-30-ME | Strands S30-ME drill press parts and instruction manual | on line |
| S-32-M | Strands S32M drill press parts and instruction manual | on line |
| S-32-ME | Strands S32-ME drill press parts and instruction manual | on line |
| S-35 | Strands S35 drill press parts and instruction manual | on line |
| S-40-U (M) | Strands S40-U milling and drilling manual | on line |
| S-53 | Strands S53 drilling machine parts and instruction manual | on line |
| S-68 | Strands S-68 | on line with dog style clutches on gear shift (see part # 608 to idenify ) this is only important if you are replacing part of the geared drive |
| S-68 | Strands S-68 | on line with hex style clutches on gear shift (see part # 608 to identify ) this is only important if you are replacing part of the geared drive |
| Supplement for power feed box (M) | Power feed box supplement | on line |
| Supplement for autoreverse | electricals for auto reverese option | on line |
| Topwell, HH Roberts, Kent-USA, Webb, and some Forward milling machines - | ||
| Manual knee mills | 3-VK | all parts |
| 4-VK | use 3-VK parts numbers from above but be sure to specify for 4-VK. The saddle, knee and column castings are different. |
|
| 2-VS | use the 3-VK parts lists above, internal head parts are the same but the belt housing on the head, main castings and leadscrews are different. We will post a new manual soon | |
| 3-VS MILLS | use the 3-VK parts lists above, internal head parts are the same but the belt housing on the head, main castings and leadscrews are different. We will post a new manual soon | |
| 5-VK | on line with almost all parts in stock. #40 taper only. Box ways on the column and knee. Dovetail ways on the table. | |
| 3-GL | for head parts see the GL-heads
below and for machine frame parts see the VK models above |
|
| 4-GL | for head parts see the GL-heads below and for machine frame parts see the VK models above | |
| 5-GL 5-GL-RG Top half of heads | top half of heads with inverter drives | |
| 5-VF table and saddle parts | these will be the same on the TW-32-QVF exept that the Y axis ballscew and it's covers will be longer. | |
| 5-VF knee | ||
| 5-AVK | with almost all parts in
stock. Head parts are the same a 5-VK above. table and saddle parts are the same as the TW105 and TW40 bed mills see below |
|
| 4-VF | for head parts see the GL-heads
below and for machine frame parts see the VK models above |
|
| Spindle return springs | these fit most Taiwan made Bridgeport style milling machines | |
| Manual bed mills | TW-96 and TW-32 ( large combined book ) | on line with almost all parts in stock |
| TW-40 series | on line with almost all parts in stock | |
| TW-50 series | on line with almost all parts in stock | |
| HH Roberts GL-heads | Bridgeport
Style heads 4 1/2 Hp and 7 1/2 Hp 220 V |
on line, for both 4-GL and 5-GL heads with almost all parts in stock |
| Bridgeport
Style heads 4 1/2 Hp and 7 1/2 HP 460 V |
call | |
| ram adaptor drawing for above | on line with almost all parts in stock | |
| ram adaptor drawing for 5-GL style - 7 1/2 Hp | new drawings and photos posted, April / 07 | |
| Yamazaki lathe parts | see Mazak parts | |
