HH Roberts Machinery Ltd logo
Questions ?
Call us at
asdf
H.H. Roberts Machinery Limited
1324 Matheson Blvd E., Mississauga, Ontario, Canada. L4W-2Z7, Fax 905-624-9065
asdf
AnnnYang Conventional Lathes
A photo gallery..
New pictures of a 71" and 78" x 50' models at the bottom of this page
preparing to fit a large bore spindle inspecting a headstock
assembling a tailstock a long lathe bed
a 40 inch winng lathe inside a headstock with a large bore spindle
showing a solid one piece bed and base a large steady rest on a long lathe
a toolpost grinder a lathe in assembly
super heavy duty tailstock

Annnyang60 inch swing lathe
Annnyang 80 inch swing lathe
Annnyang 70 inch swing lathe
Annnyang 70 inch swing lathe
Annnyang 40 inch swing lathe
Annnyang 40 inch swing lathe rear
Annnyang 40 inch swing lathe end view
Annnyang 40 inch swing lathe
Annnyang 50 inch swing lathe
Annnyang 50 inch swing lathe
Annnyang lathe
lathe with faceplate
Annnyang lathe short
Annnyang lathe assembly
Annnyang lathe assembled
Annnnyang lathe 1 piece base
back side of lathe
longer annnnyang lathe
lathe with hydraulic tailstock
lathe with huge steady rest
annnnyang lathe
lathe testing
very long lathe
very long lathe from headstock
tailstock testing
log bed before assembly
long bed before assembly
lheadstock fitting
long bed arriving from foundry
long bed inspection
large 4 jaw chuck
.

The pictures below are of an 1800 mm x 15 M machine ( 71" x 50 ' ) taken
in the factory at Annnyang

The machine has 2 carriages, as can be seen in the photos

The bottom picture shows a centerline boring and drilling attachment,
and the chip coveyor systems

To see aditional pictures of the 1800 and 2000mm swing lathes click here
Annnyang 1800mm x 15 M manual lathe



Thrust on the tailstock and clamping on the bed are hydraulic.
hydraulic tailstock
hyadaulic tailstock front
hydraulic pump
hydraulic pump for tailstock




<